Amplifier Featuer Descriptions - Lanzar MAXP 2760 User Manual

Lanzar car audio car amplifier user manual
Table of Contents

Advertisement

AMPLIFIER FEATUER DESCRIPTIONS
~Z760fNU'XPZ960
Z CHANNELAMPUFIERS
The X..oVER slide switch selects the intermal crossover functions:
- The input signal is routed directiy to the UNE OUT RCA jacks. regardless of the
X-OVER setting simplifying daisy chaining of amplifiers.
• HP: Selects the built in HIGH PASS filter. variable from 40 Hz to 2KHz.
• FlAT: Bypasses all crossovers for full frequency range operation.
LP: Selects the built in LOW PASS filer. variable from 30 Hz to 150Hz.
Note that the LOW PASS signal is MONO
- In the LP position. the HIGH PASS filter acts as a subsonic filter.
When the LP mode is selected. a 0 to + I 0 dB. at 45 Hz. BASS EO is
also switched in.
The REMOTE jack enables dash mount level control of the LOW PASS signal.
~4Z60
4
CHANNEL AMPLIFIERS
The AMPLIFIER CH I/ZCH X-OVER slide switch selects the input signal for
channel pair 1& 2:
• HP: Selects the built in HIGH PASS filter. variabe from 40 Hz to 2KHz.
· FULL: Bypasses all crossovers for full frequency range operation.
· LP: Selects the built in LOW PASS filter. variabe from 30 Hz to 150Hz.
Note that the LOW PASS signal is MONO.
-In the LP position. the HIGH PASS filter acts as a subsonic filter.
- When the LP mode is selected. a 0 to + I 0 dB. at 45 Hz. BASS EO is also
switched in.
-
The AMPLIFIER CH 3/CH 4 X-OVER slide switch selects the input signal
for channel pair 3&4
• HP: Selects the built in HIGH PASS fiter. variable from 40 Hz to 2KHz.
· FULL: Bypasses all crossovers for full frequency range operation.
· LP: Selects the built in LOW PASS filter. variabe from 30 Hz
to
150Hz.
Note that the LOW PASS signal is MONO.
-In the LP position. the HIGH PASS filter acts as a subsonic filter.
- When the LP mode is selected. a 0 to + I 0 dB. at 45 Hz. BASS EO is also
switched in.
- Full range signal from channels I
I
2 inputs are routed to the Une OUT RCA
jacks. regardless of the setting of the X-OVER switches.
- The REMOTE jack enables dash mount level control of the LOW PASS Signal.
CH3/40nly.
FEATURES
• Bass Boost Circuit
• Variable low Pass Crossover
• Anti-Thump Turn-On
• Tri-Mode Configurable
• Soft Turn On/Off
• RCA Une Input
• Blue light Illuminated lanzar Logo
• Power Protection LED Indicators
• Advanced Protection Circuitry
• Bass Boost Remote Control
• THD: <0.05%
• SIN
Ratio: >95dB
• Frequency Response: 10Hz-40KHz

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Maxp 2960Maxp 4260

Table of Contents