OPTIONAL BRICK LINER INSTALLATION INSTRUCTIONS
INSTALLING OPTIONAL BRICK LINER
1.
Remove screen assembly from fireplace.
2.
Remove logs from burner assembly.
3.
Insert rear brick liner and (2) side brick liners onto bottom of
the inner casing. Align grout lines on rear brick liner with grout
lines on side brick liners. You must insert rear brick liner before
inserting the (2) side brick liners.
4.
Install (1) "Z" shaped brick liner bracket
5.
Install (1) "L" shaped brick liner bracket at the bottom of
each side brick liner as illustrated.
NOTE: Discard the long brick liner mounting brackets not
used.
6.
Replace logs into burner assembly. Refer to appropriate
Installation Instructions and Owner's Manual.
7.
Attach screen assembly to fireplace.
8.
Installation of optional brick liner is completed.
1
5
3
25783-5-1011
VPP1A-22 For Unvented Gas Fireplace
1
2
5
4
Index
Part
Number
Number
1
20477
2
R6498
3
R6497
4
R6499
5
19401
Figure 20
Description
BRICK LINER BRACKET - UPPER (2
REQUIRED)*
BRICK PANEL - REAR*
BRICK PANEL SIDE - LEFT*
BRICK PANEL SIDE - RIGHT*
BRICK LINER BRACKET -LOWER (2
REQUIRED)*
Page 21