Samsung CLP-36x Series User Manual page 100

Installing driver over the network
5 Choose the option in Using Enhanced Features and Participating in
Printer Usage Information Collection Program. Then, click Next.
6 Select Network connection on the Printer Connection Type screen.
7 If the Connect Device window appears, check that the machine is
connected to your network. Then, click Next.
The firewall software might be blocking network communication. Before
connecting the device to the network, disable the computer's firewall.
8 The searched machines will be shown on the screen. Select the one you
wish to use and click OK.
Follow the instructions in the installation window.
9
Silent installation Mode
Silent installation mode is an installation method that does not require any user
intervention. Once you start the installation, the machine driver and software
are automatically installed on you computer. You can start the silent installation
by typing /s or /S in the command window.
Command-line Parameters
Following table shows commands that can be used in the command window.
Following command-line are effective and operated when command is
used with /s or /S. But /h, /H or /? are exceptional commands that can be
operated solely.
Command- line Definition
/s or Starts silent installation.
/S
/p"<port name>" or Specifies printer port.
/P"<port name>"
Network Port will
be created by use
of Standard TCP/
IP Port monitor.
For local port, this
port must exist on
system before
being specified
by command.
Description
Installs machine drivers
without prompting any UIs
or user intervention.
Printer port name can be
specified as IP address,
hostname, USB local port
name or IEEE1284 port
name.
For example
• /p"xxx.xxx.xxx.xxx" in
where, "xxx.xxx.xxx.xxx"
means IP address for
network printer. /
p"USB001", /P"LPT1:", /
p"hostname"
2. Using a network-connected machine
100