Westinghouse WVE613 User Manual page 29

Hide thumbs Also See for WVE613:
Table of Contents

Advertisement

WARNING
CAUTION
Do not remove the slide mechanism on the separate grill
underbench model (WVG655). The grill dish can easily
be removed for cleaning.
Removing the side racks
(excluding model WEVP618)
Grasp the middle wire at the front.
Pull firmly inwards.
After cleaning in hot soapy water, reinstall the side
racks by inserting the rear pins first.
Removing catalytic liners (where fitted)
TIPS & INFORMATION
IMPORTANT
Catalytic self-clean panels are coated with a specially
formulated enamel coating over a base of regular
enamel. This enamel coating has a rough and porous
surface. During normal cooking, fats and other food
splatter is partially absorbed into the surface and
oxidised away. This oxidisation of the fat works best at
high temperatures. You will find that if you do a lot of
lower temperature baking, around 180°C, then the self-
cleaning process may not be complete. If lightly soiled,
you can set the oven to 250°C for around one hour to
completely remove the soil.
Should the panels become heavily soiled, they will need
to be taken out of the oven and cleaned by hand. They
can be cleaned by first soaking in warm soapy water for
at least 2 hours and then wiping clean with a soft cloth.
NOTE: Solid cleaning powders, creamy cleansers, caustic
oven cleaners, steel wool or other scourers will ruin the
catalytic surface and must NEVER BE USED.
Lift the liner up to disengage the hooks.
The liners should now be free to be pulled in towards
the centre of the oven.
Removing and replacing the oven back light and
side light (where fitted)
Turn oven light glass anticlockwise to remove it for
globe replacement.
To remove side light, place a spoon under the light
glass and lever off. Replace globe and snap glass
cover back into position.
A special high temperature resistant globe should
be used. This can be purchased from Electrolux
Customer Care Centre.
WARNING
WARNING
Make sure the appliance is turned off before you remove
or replace parts, to avoid the possibility of electric shock.
CARE AND CLEANING
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents