Note For Repair - Sony DCR-SR58E Service Manual

NOTE FOR REPAIR

• Make sure that the flat cable and flexible board are not cracked
of bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
• When remove a connector, don't pull at wire of connector. It is
possible that a wire is snapped.
• When installing a connector, don't press down at wire of con-
nector.
It is possible that a wire is snapped.
• Do not apply excessive load to the gilded flexible board.
DCR-SR58E/SR68/SR68E/SR78E/SR88/SR88E_L2
Cut and remove the part of gilt
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
2-2