Scan Pattern - Symbol LS4278 Product Reference Manual

5-8 LS4278 Product Reference Guide
Time Delay to Reduced Power Mode (continued)

Scan Pattern

This parameter determines the pattern (mode) of scanning. Scan the appropriate bar code below to set the scanning mode.
• Single-line Only - Scan Single-line Only for a single-line scan mode. The laser has no up and down scan line movement
(no raster). (For an example of a single-line scan, see
• Multi-line Smart Raster - Scan Multi-line Smart Raster for a scan line begins as a single line and moves up and down
(rasters) when a partial scan of a bar code is detected, or no bar code is decoded 500 ms after the trigger is pulled. Upon
seeing a stacked RSS code, the scanner immediately rasters. (For an example of a multi-line scan, see
6.)
• Multi-line Always Raster (default) - Scan Multi-line Always Raster for rastering (up and down scan line movement) to
begin immediately.
Single-line Only
(No Raster)
*
Multi-line Always Raster
5 secs
Figure 2-2 on page 2-6.)
Multi-line Smart Raster
4 secs
Figure 2-3 on page 2-