Table Of Contents; Safety Starts With You; Introduction - Simpson PTP-27S Operator's Manual

saFetY starts WItH YOu

A. TRAINING
1. All operators must complete the tool manufacturer's training before
attempting to take an exam or to operate Simpson Strong-Tie
must obtain certification of training from an authorized Simpson Strong-Tie
instructor. If such training is not available where you purchased the tool,
call or write Simpson Strong-Tie before attempting to operate the tool for
information on the nearest authorized instructor. Simpson Strong-Tie also
offers online training and certification. For more information, visit
www.strongtie.com. Remember, obtaining this instruction is YOUR
RESPONSIBILITY.
2. Read this manual completely and understand its contents fully before
attempting to operate the tool. If there is anything in this manual that
you do not fully understand, ask your instructor or call Simpson
Strong-Tie for information. Reading and understanding this manual
is YOUR RESPONSIBILITY.
B. LIMITATIONS
1. Just as no instruction book of any kind can forewarn a learner against all
possible situations or emergencies that may arise, neither can Simpson
Strong-Tie instructors or printed instructions detail all possible conditions
or circumstances surrounding the use of this tool or its supporting products.
Recognizing these circumstances and reacting in a safe manner is YOUR
RESPONSIBILITY.
2. Simpson Strong-Tie disclaims any responsibility for injury or death, which
may result from any disregard of this manual or the verbal instruction of
the authorized Simpson Strong-Tie instructor. Following the rules of safe
operation given to you here and verbally is YOUR RESPONSIBILITY.
SAFETY STARTS WITH YOU!!!
OBTAIN AUTHORIZED TRAINING
tools. You
®
-1-

taBle OF cOntents

Safety Starts with You ..................................................................................... 1
Introduction .................................................................................................... 2
General Handling of P.A.T. and Powder Loads .................................................3
Making Safe Fastenings ..................................................................................4
The "Nevers" of P.A.T. Fastening .....................................................................5
Before Chambering a Powder Load ................................................................. 6
Safe Handling Practices of P.A.T. .....................................................................7
Operating Principles of P.A.T. ..........................................................................8
Principles and Guidelines for Proper Fastening ..........................................9-10
Schematic and Parts for the PTP-27SMAGR and PTP-27LMAGR ............11-12
Schematic and Parts for the PTP-27S and PTP-27L ................................13-14
How to Load and Fire the PTP-27SMAGR and PTP-27LMAGR ................15-17
How to Load and Fire the PTP-27S and PTP-27L .....................................18-19
Dismantling the PTP-27SMAGR and PTP-27LMAGR .................................... 20
Dismantling the PTP-27S and PTP-27L ........................................................ 21
Maintaining and Cleaning .............................................................................22
Magazine Conversion ................................................................................... 23
Single-Shot Conversion ...............................................................................24
Troubleshooting Tips ...............................................................................25-26
PTP-27SMAGR and PTP-27LMAGR Kit Contents ......................................... 26
Tool Warranty .................................................................................. Back Cover

IntrOductIOn

The Simpson Strong-Tie ® PTP-27S, PTP-27SMAGR, PTP-27L and PTP-27LMAGR tools
are low-velocity or indirect-acting, powder-actuated tools (P.A.T.). Do not attempt to
operate either of these tools or any other tool before obtaining proper training and operator
certification.
READ THIS MANUAL CAREFULLY!
Understanding the safety features, operating principles and limitations of the tool will help
you operate the tool with the greatest SAFETY and efficiency. Simpson Strong-Tie disclaims
any responsibility for incidents resulting from the disregard of these instructions.
-2-