Simpson PTP-27S Operator's Manual
  1. Manuals
  2. Brands
  3. Simpson Manuals
  4. Power Tool
  5. PTP-27S
  6. Operator's manual

Simpson PTP-27S Operator's Manual

.27 caliber fully automatic magazine tools
Hide thumbs
Table of Contents

Advertisement

Quick Links

Enlarged version
liMited warranty (One year)
On siMpsOn strOng-tie
Simpson Strong-Tie Company Inc. ("Simpson") provides this limited warranty to
original purchaser. This product, if properly used and maintained in compliance with
all instructions and warnings, will be free from substantial defects in material and
manufacturing for one year from purchase date. Purchaser's sole remedy is replacement
upon return to Simpson within one year of purchase (shipping prepaid).
WHERE LAWFUL, SIMPSON DISCLAIMS ALL OTHER
WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
One Year
A PARTICULAR PURPOSE BEYOND THIS WARRANTY
Limited
PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS
Warranty
ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATION MAY NOT APPLY TO YOU. WHERE
LAWFUL, UNDER NO CIRCUMSTANCES SHALL SIMPSON
BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL
DAMAGES OR DIRECT OR INDIRECT LOSS OF ANY KIND, INCLUDING BUT NOT LIMITED
TO BODILY INJURY, DEATH OR PROPERTY DAMAGE. SIMPSON'S ENTIRE LIABILITY IS
LIMITED TO THE PURCHASE PRICE OF THIS PRODUCT. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION. MAY NOT APPLY TO YOU. SIMPSON IS IN NO WAY LIABLE FOR
INCIDENTS RESULTING FROM USE WITHOUT PROPER CERTIFICATION OR DISREGARD OF
INSTRUCTIONS AND WARNINGS. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
The PTP-27S, PTP-27SMAGR, PTP-27L and PTP-27LMAGR tools comply
with OSHA requirements and with ANSI A10.4 2007 specifications.
Return Tools To:
Northwest U.S.A.
Southwest U.S.A.
Simpson Strong-Tie Co. Inc.
Simpson Strong-Tie Co. Inc.
5151 S. Airport Way
12246 Holly Street
Stockton, CA 95206
Riverside, CA 92509
(209) 234-7775
(800) 999-5099
Southeast U.S.A.
Eastern Canada
Simpson Strong-Tie Co. Inc.
Simpson Strong-Tie Co. Inc.
2221 Country Lane
5 Kenview Boulevard
McKinney, TX 75069
Brampton, ON L6T 5G5
(972) 542-0326
(905) 458-5538
Brand tOOls
®
Northeast U.S.A.
Simpson Strong-Tie Co. Inc.
2600 International Street
Columbus, OH 43228
(614) 876-8060
Western Canada
Simpson Strong-Tie Co. Inc.
11476 Kingston Street
Maple Ridge, BC V2X 0Y5
(604) 465-0296
T-SAS-PTP27MN12 2/12
WARNING
read this Manual
BeFOre Operating these tools
OperatOr's Manual
PTP-27S • PTP-27SMAGR
and
PTP-27L • PTP-27LMAGR
.27 Caliber Fully Automatic Magazine Tools
5956 W. Las Positas Blvd., Pleasanton, CA 94588 • www.strongtie.com

Advertisement

Table of Contents
loading

Related Manuals for Simpson PTP-27S

Summary of Contents for Simpson PTP-27S

  • Page 1 PTP-27L • PTP-27LMAGR EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION. MAY NOT APPLY TO YOU. SIMPSON IS IN NO WAY LIABLE FOR .27 Caliber Fully Automatic Magazine Tools INCIDENTS RESULTING FROM USE WITHOUT PROPER CERTIFICATION OR DISREGARD OF INSTRUCTIONS AND WARNINGS.

  • Page 2: Table Of Contents

    READ THIS MANUAL CAREFULLY! Understanding the safety features, operating principles and limitations of the tool will help you operate the tool with the greatest SAFETY and efficiency. Simpson Strong-Tie disclaims any responsibility for incidents resulting from the disregard of these instructions.

  • Page 3: General Handling Of P.a.t. And Powder Loads

    ® If the material is too hard, the fastener can ricochet, and possibly escape, striking unsafe functioning of the tool. Use only genuine Simpson Strong-Tie you or bystanders and cause serious injury or death. parts, fasteners and powder loads at all times.

  • Page 4: The "Nevers" Of P.a.t. Fastening

    SELECTING FASTENERS AND LOADS injury or death. 7. Never fasten into material that is too soft, such as wood, plaster, drywall Powder Loads for PTP-27S, PTP-27SMAGR, PTP-27L and PTP-27LMAGR composition board, plywood, etc. This could cause the fastener to pass Model No Description through and escape resulting in serious injury or death.

  • Page 5: Safe Handling Practices Of P.a.t

    4. If at any time during the operation of the tool you feel it is not working properly, STOP using it and call your Simpson Strong-Tie representative. 5. If unnecessary bystanders are in the area tell them to leave, warn all others that you are using a powder-actuated tool.

  • Page 6: Principles And Guidelines For Proper Fastening

    prIncIples and GuIdelInes FOr prOper FastenInG prIncIples and GuIdelInes FOr prOper FastenInG FASTENING INTO MASONRY MATERIALS: FISH-HOOKING: Masonry materials suitable for fastening into include: “Fish-hooking” is when the fastener curves when driven into concrete, due to the fastener hitting large, hard, or excessive amounts of aggregate, rebar or any hard –...
  • Page 7 FOr tHe ptp-27s and ptp-27l tOOls PTP-27S PARTS LIST: Pos. Description Drawing No. Left Handle PTP-273102 Right Handle PTP-273101 Receiver PTP-273210 Short Barrel PTP-273330 Short Fastener Guide for PTP-27S and L PTP-273820 Short Baseplate PTP-273810 Trigger Lever Pin...

  • Page 8: Schematic And Parts For The Ptp-27Smagr And Ptp-27Lmagr

    PTP-273602 Long Piston PTP-276320 Regulator Bolt PTP-273601 Piston Disk PTP-273306 Firing Pin Mech. PTP-273402 Long Rubber Returner PTP-274305 Pushing Pin PTP-273401 Handle Screw PTP-273106 Firing Pin Sear PTP-273403 Nose Piece Screw PTP-275826 © 2012 Simpson Strong-Tie Company Inc. -13- -14-...

  • Page 9: How To Load And Fire The Ptp-27Smagr And Ptp-27Lmagr

    HOW tO lOad and FIre tHe ptp-27sMaGr HOW tO lOad and FIre tHe ptp-27sMaGr and ptp-27lMaGr tOOls and ptp-27lMaGr tOOls (cOntInued) Never place your hand over the nose of the tool unless inserting a fastener 4. Select the proper strip powder load for and then only with the chamber empty.

  • Page 10: How To Load And Fire The Ptp-27S And Ptp-27L

    (cOntInued) and ptp-27l tOOls 6. Make sure the tool is perpendicular The PTP-27S is shown; however, the same loading and firing instructions apply (90°) to the work surface. Fully to the PTP-27L. depress the tool against the work 1.

  • Page 11: Dismantling The Ptp-27Smagr And Ptp-27Lmagr

    HOW tO lOad and FIre tHe ptp-27s dIsMantlInG tHe ptp-27sMaGr and ptp-27l tOOls (cOntInued) and ptp-27lMaGr tOOls 4. Make sure the tool is perpendicular The PTP-27SMAGR and PTP-27LMAGR tools have wearable parts that (90°) to the work surface. Fully occasionally need replacing, and the tool requires periodic cleaning.

  • Page 12: Dismantling The Ptp-27S And Ptp-27L

    The PTP-27S and PTP-27L tools have wearable parts that occasionally need PTP-27LMAGR TOOLS: replacing, and the tool requires periodic cleaning. A PTP-27S is shown below in the A clean and maintained tool always functions best. These tools should be cleaned after demonstration.

  • Page 13: Magazine Conversion

    MaGaZIne cOnversIOn sInGle-sHOt cOnversIOn The PTP-27S and PTP-27L tools are automatic tools. They can be converted from a The PTP-27SMAGR and PTP-27LMAGR tools are fully automatic magazine tools. They single-shot to a magazine tool by changing a few parts (purchased separately). The can be converted to an automatic single-shot tool by changing a few parts (purchased PTP-27S is shown below;...

  • Page 14: Troubleshooting Tips

    Tool does Damaged firing pin or breech Replace damaged parts* not fire Magazine feed mechanism Contact your local Simpson Strong-Tie ® Damaged fastener guide Repair or replace fastener guide is damaged representative Receiver Plug has loosened...

This manual is also suitable for:

Ptp-27lPtp-27lmagrPtp-27smagr

Table of Contents