Connection; Basic Connections - Panasonic DMR-PWT540 Operating Instructions Manual

Getting started

Connection

Basic connections

3D programmes can be played back when this unit is connected to a 3D compatible TV.
• Before connection, turn off all equipment and read the appropriate operating instructions.
Cooling fan
RF coaxial cable
AC mains lead
(supplied)
• Connect only after all other
connections are complete.
Household mains socket
(AC 220 to 240 V, 50 Hz)
To connect and register the USB HDD (optional)
Refer to "Registering the external HDD (USB HDD)". (
About HDMI cable
If you use an optional HDMI cable, use the High Speed HDMI cables. Non-HDMI-compliant cables
cannot be utilized.
It is recommended that you use Panasonic's HDMI cable.
When outputting 1080p signal or 24p (4K) signal, please use HDMI Cables 5.0 meters or less.
• This unit cannot connect the TV that does not have the HDMI terminal.
• Keep the RF coaxial cables as far away as possible from other cables.
• The HDMI connection supports VIERA Link "HDAVI Control" (
• You cannot connect this unit to DVI devices that are incompatible with HDCP.
Depending on the device, images may not display properly or at all when connecting with a DVI/HDMI switching cable. (Audio
cannot be output.)
• If you are connecting to a TV that is only compatible with 2 channel audio output, audio with 3 channels or more will be down
mixed and output as 2 channels, even if connecting with an HDMI cable. (Some discs cannot be down mixed.)
14
SQT0136
To the aerial
Aerial cable
(supplied)
HDMI cable
(supplied)
VHF/UHF
HDMI
RF IN
TV's rear panel
59)
61).
This unit's rear panel