Recording, Timer Recording And Copying; Play - Panasonic DMR-PWT540 Operating Instructions Manual

Recording, timer recording and
copying
Cannot record.
Cannot copy.
• Some broadcasts are copyright protected.
• You cannot record/copy to the disc.
Timer recording does not work properly.
• Failed timer recordings are displayed in grey
with on the Timer Recording screen. (
When you programme a timer recording, check
the screen icons. If "!" is displayed, this timer
programme may not be recorded because:
- there is not enough space left.
- the number of possible titles has reached its
maximum.
- programmes are deactivated, etc.
Auto Renewal Recording does not work
properly.
• The programme will not be overwritten in the
following cases:
- the programme is protected
- any programme is being played back or copied
- a screen such as DIRECT NAVIGATOR is
displayed
Instead, the programme will be saved as a
separate programme and that will be
overwritten.
A part or whole of a recorded title has been
lost.
• If there is a power failure or the AC mains lead is
disconnected from the household mains socket
while recording or editing, the title may be lost or
the HDD may become unusable. We cannot
offer any guarantee regarding lost programmes.

Play

Cannot play back.
• The disc is dirty. (
• The disc is scratched or marked.
• The disc may not be able to play back if it was
not finalized or a Top Menu was not created on
the equipment used for recording.
Audio and video momentarily pause.
• DVD-R DL and +R DL discs have two writable
32)
layers on one side. Video and audio may
momentarily cut out when the unit is switching
layers.
BD-Video or DVD-Video is not played.
• Ensure the disc is for the correct BD-Video
region code or DVD-Video region number, and
is not defective.
You have forgotten your rating PIN.
• The rating level returns to the factory preset.
1 While the unit is on, press and hold [OK], the
yellow button and the blue button at the
same time for more than 5 seconds.
• "00 RET" is displayed on the unit's display.
2 Repeatedly press [1] (right) until "03 VL" is
displayed on the unit's display.
3 Press [OK].
• "INIT" is displayed on the unit's display.
Image for the Quick View is not smooth.
• Image may not be played back smoothly in case
of high definition titles.
Troubleshooting
10)
SQT0136
81