Connection - Panasonic DMR-BCT765 Operating Instructions Manual

Connection

3D programmes or 4K images can be played back when this unit is connected to 3D or 4K
compatible terminal of a 3D or 4K compatible TV.
• Before making any connections, please disconnect all the units from AC power.
(Connect the AC mains lead after making all connections.)
• Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic's HDMI cable.
When outputting 1080p or 24p (4K) signal, please use HDMI cables 5.0 meters or less.
• When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of
power, even when the unit is in standby mode. (
[BCT765] [BCT760] Basic connections
To the CATV terminal or the Aerial
RF coaxial cable
(supplied)
AC mains lead
(supplied)
• Connect only after all other
connections are complete.
Household mains socket
(AC 220 to 240 V, 50 Hz)
• Keep the RF coaxial cables as far away as possible from other cables.
• Switchover from DVB-T to DVB-T2 is scheduled. (DVB-T2 is not supported by this unit.)
For details, check the relevant announcements made by broadcast stations. (Germany only)
104)
CATV coaxial cable or Aerial cable
HDMI cable
This unit's rear panel
VHF/UHF
HDMI
RF IN
11
TQBS0024