Chevrolet Kodiak 2006 Owner's Manual page 107

Table of Contents

Advertisement

Recommended Transfer Case Settings
Driving Conditions
Normal
Severe
Extreme
Vehicle in Tow*
*See Towing Your Vehicle on page 4-37 for further
information.
m
2
(Two-Wheel High): This setting is for driving in
most street and highway situations. The transfer
case does not drive the front axle in two-wheel drive.
The front-axle will spin if the front wheel hubs are
locked. Be sure to unlock the hubs to achieve the best
fuel economy.
m
4
(Four-Wheel High): Use Four-Wheel High when
you need extra traction, such as on snowy or icy
roads or in most off-road situations. Be sure the front
wheel hubs are locked when you want to drive in
Four-Wheel High.
Transfer Case Settings
m
m
n
2
4
4
YES
YES
YES
n
4
(Four-Wheel Low): This setting sends maximum
power to all four wheels. You might choose Four-Wheel
Low if you are driving off-road in deep sand, deep
N
mud, and climbing or descending steep hills. Be sure
the front wheel hubs are locked when you want to drive
in Four-Wheel Low.
CAUTION:
{
YES
Shifting the transfer case to NEUTRAL can
cause your vehicle to roll even if the
transmission is in PARK (P). You or someone
else could be injured. If you are going to leave
your vehicle, set the parking brake and shift
the transmission to PARK (P) and make sure
the transfer case is in a drive gear.
Notice: If your vehicle has an Allison
and you try to put the transmission in PARK (P)
while the transfer case is in Four-Wheel Low,
the transmission may not go into PARK (P) and
could damage your vehicle. When parking your
vehicle, make sure the transfer case is in Two-Wheel
High or Four-Wheel High.
NEUTRAL: Shift the vehicle's transfer case to
NEUTRAL only when towing your vehicle.
®
transmission
2-37

Advertisement

Table of Contents
loading

Table of Contents