Sony DXF-C50WA Operating Instructions Manual page 39

Page Menu Item
PEAKING MODE [STD]/PLUS
03 PEAKING
COLOR/AREA
SEL
POSITION
PEAKING UP
COLOR DETECT EXEC
HUE PHASE
HUE WIDTH
SAT WIDTH
FREQUENCY
RANGE
Settings Function
(default in [ ])
For selecting a peaking mode.
[COLOR]/AREA/ For selecting a peaking plus mode.
BOTH
a) [CNT]/UPPER/ For selecting the effective PEAKING area when "AREA" or
RIGHT/LOWER/ "BOTH" is selected in "COLOR/AREA SEL."
LEFT The "POSITION" settings are linked to the "MAG
POSITION" settings of the MAGNIFICATION menu.
[OFF]/ON For selecting whether to increase the peaking level by +6 dB
or not when "PLUS" is selected in "PEAKING MODE."
For detecting the color of which its edges are to be
enhanced.
This feature is enabled only when COLOR or BOTH is
selected.
[0] to 359
For specifying the hue center position of which edge
enhancement is to be performed.
–99 to [0] to 99
For specifying the hue range of which edge enhancement is
to be performed.
–99 to [0] to 99
For specifying the saturation range of which edge
enhancement is to be performed.
L/[M]/MH/H For specifying the center frequency of edge enhancement
signals.
1 to [2] to 3
For specifying the variability of edge enhancement level.
STD: Standard mode
PLUS: PEAKING PLUS mode
COLOR: Sharpens the edges for the selected color only
AREA: Sharpens the edges for the selected area only
BOTH: Sharpens the edges for the selected color and
area only
CNT: Sharpens the edges of the center area
UPPER: Sharpens the edges of the upper area
RIGHT: Sharpens the edges of the right area
LOWER: Sharpens the edges of the lower area
LEFT: Sharpens the edges of the left area
OFF: RANGE setting
ON: RANGE setting +6 dB
39
Using the Menu