Table of Contents
Advertisement
5.6.1. Static Colour
Just go into the menu as described. Then you can adjust the
Colours red, green, blue and white from 000 to 255. That's how you can mix the desired static colour.
The Strobe value can be set from 0 to 20 Hz.
5.6.2. Auto
-
Select the target AUTO program and press ENTER
-
Programs Aut.01 to Aut.10 are fully pre programmed and will not be altered by changes in
EDIT mode.
-
Programs Pro.01 to Pro.10 are fully pre programmed and can be edited in EDIT mode
5.6.3. Run
-
Enter the RUN mode to set the working mode.
-
DMX mode is for using DMX 512 controllers to control the fixtures.
-
Slave mode is for master-slave operation.
5.6.4. DMX
-
Enter the DMX address mode to set the DMX address from 001 to 512.
5.6.5. Personality
-
Enter the PERSONALITY mode to select DMX Mode: STAG, Arc.1, Ar1.d, Arc 2, Ar2.d,
Ar2.s or HSv
14 / 21
Advertisement
Table of Contents
