Pioneer AVX-7300/UC Service Manual page 55

- Removing the Grille Assy (Fig.6)
Remove the two screws, remove the connector
and then remove the Grille Assy.
-
Removing the Control PCB (Fig.6)
Straight the tabs at six locations indicated.
Remove the screw.
Disconnect the connector and then remove the Control
PCB.
-
Removing the Frame (Fig.7)
Remove the eight screws and then remove the
Frame.
Control PCB
Grille Assy
Frame
AVX-7300
Fig.6
Fig.7
55