Table of Contents
Advertisement
After purchasing the Chart Update Card, follow the procedure below to update the charts.
1. Turn Off the GPS Chart Plotter.
2. Insert the Chart Update Card into the slot.
3. Press and hold [PWR] to turn the GPS Chart Plotter On.
4. The GPS Chart Plotter's display will show a message that the Built-In Charts are being
uploaded.
5. After uploading the GPS Chart Plotter will check to ensure the charts have been loaded
correctly and show a message.
If the message shows the charts were not updated correctly, follow steps 1-4 again. If the GPS
Chart Plotter shows a error message again, contact C-MAP USA at (800) 424-2627 for assistance.
5.1
INSERTING THE OPTIONAL MAX C-CARD
Hold the C-CARD by the long inclined side so that you can see the C-MAP B
Open the door, gently push the C-CARD into the slot: push the C-CARD in as far as it will
go, then close the door.
The small connector below the C-CARD is only used by Standard Horizon repair technicians.
Key points are:
Data Features
· ISO Certification (electronic chart production process with quality certification)
· Extra Large Coverage (all the C-Map electronic chart detail and a huge coverage
without having to change cartridge)
· Official data source (data based on use of official data sources Hydrographic Offices
Release)
· Detailed World Background (worldwide background chart with details)
· Depths & Land Elevation (color shading of sea depth and land altitude for improved
chart appearance)
· Bathymetric & Spot Soundings (Data Base with depth and bathy information for an
extraordinary view of the seabed depth)
· Detailed Port Plan to information (complete port and marina charts with detail)
Page 46
INCLINED
SIDES
n .
s e r.
d a te
e
c o d
c l a s
s
INSERTION
DIRECTION
Figure 5.1 - Inserting C-CARD
NOTE
d a
d a
te
te
d e
d e
c o
c o
s e r.
n
s s
s s
c l a
c l a
NOTE
J
label.
Y
EPPESEN
da t e da t e
co de co de
se r . n se r . n
s
s
cl as
cl as
CP590
Advertisement
Table of Contents
