Table of Contents
Advertisement
DISPLAY COLOR
SHIP ICON
COMPASS ROSE
CURSOR SPEED
MEASURE DISTANCE
START point
WINDOWS SETUP
LANGUAGE
AUTO INFO
Auto Info OFF
Page 32
Changes the background colors of the chart page to enhance the visibility of the screen
depending on the surrounding light conditions. Normal is recommended when the GPS
Chart Plotter is not exposed to the direct sunlight. When this mode is set the charts are
displayed in order to use colors as similar as possible to ones used in the original paper
charts. Classic uses vivid chart colors presentation. NOAA allows setting NOAA paper
chart colors presentation. Night is recommended when the environment is dark in order
to reduce the glare of the display. The GPS Chart Plotter displays charts and screen in
darker colors. SunLight (default) is designed to enhance the visibility of the screen when
the GPS Chart Plotter is exposed to sunlight. The charts are much brighter than in the
other modes and the depth areas are filled with the white color so different depth areas
are not easily distinguishable.
Select from a variety of ship icons that represent your vessels position on the Chart Page.
The default is Icon 6.
Allows selection of compass direction indication around ship icon. The default is On.
Selects the speed among Low, Medium (default) and High for the cursor in the CHART
page and within the MENU.
When this function is On, and the ShuttlePoint knob is moved to a location where you want
to start measuring a distance and press [ENT]. Move the ShuttlePoint knob to move the
cursor to a second location where you want to finish measuring a distance and press
[ENT]. A line will appear between the Start and Finish points and a popup window will be
shown indicating the distance and bearing from the Start and Finish points. Press [ENT]
to delete both points (Off is the default).
WAAS 3D
This menu selection allows the data windows to be customized on the CHART PAGE and
NAVIGATION PAGE (refer to section 12.0.0).
Allows changing the language for menus and data screens.
When the cursor is moved over a buoy, Mark or other item a popup window will show
information of the item. This menu item allows the window to be turned Off, On Points
(default) or On All.
Auto Info ON POINTS
WAAS 3D
FINISH point
Auto Info ON ALL
WAAS 3D
WAAS 3D
WAAS 3D
CP590
Advertisement
Table of Contents
