Automatic Operation - York R91 BGE Owner's Manual

Automatic operation

SET TEMPERATURE ( )
AUTO
COOL
DRY
HEAT
FA N
HIGH
MED
LOW
1
MODE FA N SPEED ON/ OFF
AI R
SWIN G
DIRECTION
TIMER ON TIMER OF F
TEMP
RESET L OC K
LE D
DISPLAY
TURBO SLEEP
BY JOHNSON CONTROLS
When you set the air conditioner in AUTO mode,
it will automatically select cooling, heating
(cooling only type without), or fan only operation
depending on what t emperat ure you have
selected and the room temperature.
Once you select t he operat ing mode, t he
operating conditions are saved in the unit's
microcomputer memory.
Thereafter, the air conditioner will start operating
under the same conditions when you simply push
3
the ON/OFF button of the remote controller.
Start
2
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit starts ashing.
1. Mode select button (MODE)
Press to select AUTO.
2. T emperature button (TEMP)
Set the desired temperature. Normally, set it
between 21 °C to 2 8 °C
3. ON/OFF button
When the remote controller is o , push this
button to start the air conditioner.
Stop
ON/OFF button
Push this button again to stop the air conditioner.
If the AUTO mode is uncomfortable, you can
select the desired conditions manually.
When you select the AUTO mode, you do not
have to set the fan speed. The fan speed will be
automatically controlled.
5