Program Mode; Program Sequence And Default Settings; Function Keys - La Crosse Technology WS-7168U Instruction Manual

PROGRAM MODE

Programming Note: If 30 seconds is allowed to pass, or the CH button is
pressed during the programming mode, the unit will confirm/set the last
information entered—the display will stop flashing and return to normal
time-date readings. If you don't leave the program mode during the
programming of sections IV through XI, you can advance to step 4 of the
next program setting. If you do leave the program setting (or want to
program a specific setting) follow each instructional step to program that
setting.
I. PROGRAMMING SEQUENCE AND DEFAULT SETTINGS
Please note that while there is a snooze adjustment in the programming this
is an unused function as there is no alarm on the indoor weather station.
II.

FUNCTION KEYS

The function keys are located on the front of the unit directly below the
LCD.
The programming sequence and default (factory) settings are as
follows:
LCD Contrast
Time Zone
Daylight Saving Time
Radio-controlled time reception
12/24-hour time
Time
Year
Day and Month
Snooze (this function not used)
Temperature Format
Forecast Sensitivity
5
-5 (Eastern)
1 (on)
ON
12
12:00
2003
1.1.
10
°F
2
6