Figure 4. Plumbing Schematic - Model 3030Ak6, -6Pb - Cornelius 3030 AK 6 User Manual

1
2
W
S1 S2 S3
S1 S2 S3
SYRUP
INLETS
NOTE: 1) TO SERVICE COLD PLATE INLET FITTINGS, SINK HAS TO BE REMOVED. TO REMOVE, DISCON NECT SINK DRAIN
CONNECTIONS, THEN LIFT TWO (2) SIDE MOUNTING PINS AND PULL SINK FORWARD. REVERSE TO RECONNECT.
2) MAKE SURE ALL DRAIN CONNECTIONS ARE PROPERLY POSITIONED FOR DRAINING AFTER SERVICE, BEFORE
PANELS ARE INSTALLED.
3) DO NOT USE INLETS.
FIGURE 4. PLUMBING SCHEMATIC – MODEL 3030AK6, –6PB
91715
PLUMBING SCHEMATIC
3
W
COLD PLATE
1,2
MAY BE CARBONATED
OR NONCARBONATED
FAUCETS
MANIFOLDS
BEHIND
VALVES
3
4,5,6
WATER INLETS
6
4 5 6
W W
S4 S5 S6
S4 S5 S6
SYRUP
INLETS