Basic Configuration Of Optipoint Telephones; Web Interface - Siemens HiPath optiPoint 410 S Setup Manual

c01.fm

Basic Configuration of optiPoint Telephones

Web Interface

•
Dial(SIP/10,5,r)
The application defined in this step is Dial(). In the example, the system tries to call the
SIP participant number 10 for a duration of 5 seconds. The option r specifies that the caller
hears a ring tone while the telephone called is ringing.
4 Basic Configuration of optiPoint Telephones
Currently, the portfolio of the SIP-based optiPoint devices 410 S and 420 S comprises 9 mod-
els. To a large extent, the instructions and steps in the following section are independent of the
model. For additional information about the individual optiPoint models, please refer to the cor-
responding data sheets, user guides and administrator guides, see Section 9, "Reference
List").
There are 4 options to configure an optiPoint telephone:
• Web Interface: The telephone can be configured and controlled via a standard web brows-
er (recommended).
• Database-driven configuration tool DLS (Deployment Service): This Siemens IP telephone
manager (available at no charge) is a powerful tool for configuring larger telephone sys-
tems.
• optiGuide: User interface of the telephone. For additional information, please refer to the
corresponding User Guide or Administration Guide, see Section 9, "Reference List".
• XML interface of the telephone. For more information, please refer to the XML Administra-
tor Guide, see Section 9, "Reference List".
The following section describes the configuration via the web interface as this is the most con-
venient and viable method for most installations.
4.1 Web Interface
Open your browser and enter "https://" followed by the IP address of the optiPoint telephone,
e.g.:
"https://192.168.1.5".
Prior to loading the page the browser displays a warning indicating that the certifi-
>
cate sent by the optiPoint device is not verified or installed. In this context, you can
ignore this warning.
The website of the telephone is opened. If it is already configured, the terminal number (i.e. the
phone number) of the device is displayed in the upper right corner.
8
optiPoint 410/420 - Using with Asterisk, Configuration Guide
30. June 2006