Adding Outdoor Remote Control Senders - La Crosse Technology WS-7014U Instruction Manual

1. Press the OUT button once. "MIN" appears in the upper-
center location of the flashing OUTDOOR LCD, indicating
that the minimum temperature, and the time and date of
occurrence are displayed. The minimum records will display
for 20 seconds.
2. Press the OUT button again (once while "MIN" is still
displayed, twice otherwise). "MAX" appears in the upper-
center location of the flashing OUTDOOR LCD, indicating
that the maximum temperature and the time and date of
occurrence are displayed.
3. While "MAX" is still displayed press the OUT button again to
return to the current data display.
seconds, during either the minimum or the maximum readings,
and the unit will automatically return to current data readings.
C. RESETTING THE MIMIMUM AND MAXIMUM
RECORDS
1. All the Indoor records (minimum and maximum) will be reset
after the IN button is pressed and held for 5 seconds.
2. All the Outdoor records (minimum and maximum) will be
reset after the OUT button is pressed and held for 5 seconds.
V. ADDING OUTDOOR REMOTE CONTROL SENDERS
(OPTIONAL)
The WS-7014U is able to receive signals from 3 different Remote Control
Senders. The Remote Control Sender model(s) that you choose will come
with their own set of instructions—follow these instructions for a complete
guide to setting up. Following are some brief instructions for the basic set-
up of Remote Control Sender units with the WS-7014U. These extra
sensors can be purchased through the same dealer as this unit, or by
contacting La Crosse Technology directly.
temperature only, a TX3U will monitor temperature and display the
temperature on its LCD, and the TX3UP will monitor the temperature via a
probe for use in pools, spas, etc.
15
Or you can wait 20
A TX6U will monitor