Side-Discharging The Clippings; Installing The Side Discharge Chute; Removing The Grass Bag - Toro 20370 Operator's Manual

1. Notches
2. Rear deflector
2. Install the grass bag, ensuring that the pins on the
bag rest in the notches on the handle (Figure 12).
3. Lower the rear deflector.

Removing the Grass Bag

To remove the bag, reverse the steps above.
G017285
Figure 12
3. Grass bag pin (2)

Side-discharging the Clippings

Use the side discharge for cutting very tall grass.
If the bag is on the mower, remove it before
side-discharging the clippings.
WARNING
The blade is sharp; contacting the blade can result
in serious personal injury.
Stop the engine and wait for all moving parts to stop
before leaving the operating position.

Installing the Side Discharge Chute

Lift up the side deflector and install the side discharge
chute (Figure 13).
9
Figure 13