Ford 2006 Mountaineer Owner's Manual page 498

Seating and Safety Restraints
Press the control to move the seat
forward, backward, up or down.
Press the control to recline the
seatback forward or rearward.
Memory seats and adjustable pedals (if equipped)
This system allows automatic
positioning of the driver seat and
adjustable pedals to two
programmable positions.
The memory seat control is located
on the lower-center portion of the
instrument panel.
• To program position 1, move the
driver seat and pedals (if
equipped) to the desired position
using the associated controls. Press the SET control. The SET control
indicator light will briefly illuminate. While the light is illuminated,
press control 1.
• To program position 2, repeat the previous procedure using control 2.
A position can be recalled:
• in any gearshift position if the ignition is not in the RUN position.
• only in Park or Neutral if the ignition is in the RUN position.
A memory seat position may be programmed at any time.
128
2006 Mountaineer (mnt)
Owners Guide (post-2002-fmt)
USA (fus)