Callouts - Behringer X32 User Manual

9
X32 RACK DIGITAL MIXER User Manual

2. Callouts

(1) (3) (4) (5)
(2) (7) (8)
(1) USB button opens the Recorder View on the MAIN DISPLAY, causing the LED
to glow green. The LED will glow red to indicate access on the DATA/AUDIO
input. An unlit LED indicates no data access and inactive Recorder View.
(2) DATA/AUDIO USB input allows connection of USB flashdrives for firmware
(22) (23)
updates, loading/saving scenes and show files, and playing back or
recording WAV files.
(3) CHANNEL SELECT control cycles through all channels by turning the knob.
By pressing this knob, you can jump to the next type of channels.
(4) CHANNEL TYPE LEDs indicate which type of channel is currently selected.
(5) CHANNEL NUMBER display shows the currently selected channel.
(25)
(6) INPUT METER displays the pre-fader input level of the selected channel.
(7) SOLO button routes the currently selected channel to the monitoring
paths. The LED lights when active.
(8) CHANNEL LEVEL control adjusts the currently selected channel's output.
(9) MUTE button mutes the currently selected channel. The LED lights
when active.
MAIN MENU buttons open specific menus on the MAIN DISPLAY.
(10)
MAIN DISPLAY shows permanent information about the mixer's
(11)
configuration as well as information about the currently selected menu.
DISPLAY ENCODER knobs allow adjustment and on/off selection of the
(12)
menu items indicated at the bottom of the MAIN DISPLAY.
MAIN METER indicates the Main Mono or SOLO level in the left meter and
(13)
the Main Stereo level on the right.
PAGE SELECT buttons curse horizontally in the MAIN DISPLAY and make
(14)
Yes / No confirmations.
LAYER SELECT buttons access different parameter layers that can be edited
(15)
by the DISPLAY ENCODERS.
(6) (10) (11)
(9) (12)
(24)
(26) (27)
(13) (10) (16) (17)
(14) (15) (19) (18)
TALK button engages the Talkback microphone. Routing is defined in the
(16)
Monitoring Preferences page.
TALK LEVEL knob sets the Talkback mic gain.
(17)
CLEAR SOLO button lights to indicate that one of the channels has been
(18)
(31)
Soloed. Press to deactivate all active solo functions.
MAIN LR LEVEL knob adjusts the main stereo output bus.
(19)
ON/OFF button turns the power on and off.
(20)
MONITOR LEVEL knob adjusts the headphone and monitor output volume.
(21)
Connect headphones to the ¼" front panel input.
(28) (29) (30)
(21)
(20)