Installing The Sound Bar On A Wall - Sony HT-CT660 Operating Instructions Manual

Installing the Sound Bar on
a rack
To install the Sound Bar facing
front
1
Attach a side stand (for front-
facing installation) to each side.
To install the Sound Bar tilting
upward
1
Remove the center stand.
Center
stand
2
Attach a side stand (for upward-
tilting installation) to each side.
Installing the Sound Bar on
a wall
You can install the Sound Bar on the
wall.
Notes
 Use screws that are suitable for the wall
material and strength. As a plaster
board wall is especially fragile, attach
the screws securely to a wall beam.
Install the Sound Bar on a vertical and
flat reinforced area of the wall.
 Be sure to subcontract the installation
to Sony dealers or licensed contractors
and pay special attention to safety
during the installation.
 Sony is not responsible for accidents or
damage caused by improper
installation, insufficient wall strength,
improper screw installation or natural
calamity, etc.
continued
17
US