Hkc-Sv1 Filter Servo Unit (Optional); Installation; Attaching The Lens - Sony HDC-X300 Operation Manual

HKC-SV1 Filter Servo Unit (Optional)

The optional HKC-SV1 Filter Servo Unit permits you to
remotely control ND filter switching from a remote control
unit connected via the REMOTE connector.
The buttons for direct switching are also available on the
HKC-SV1.
Attaching the HKC-SV1 should be made by a qualified
Sony service personnel.
aND filter indicators
bND filter select buttons
n N
1 2 3 4
MACRO
ON OFF
FOCUS
M A
a ND filter indicators
The indicator corresponding to the ND filter being selected
lights.
1: Clear
2: 1/4 ND
3: 1/16 ND
4: 1/64 ND
b ND filter select buttons
Press to select the desired ND filter.
Pressing B changes the filter in the sequence of 1, 2, 3, 4,
1, . . . .
Pressing b changes the filter in the sequence of 1, 4, 3, 2,
1, . . . .
Note
To attach the HKC-SV1 to the HDC-X300/X300K,
modification of the camera may be required.
Consult your Sony representative.
FILTER
1 CLEAR 3 1/16ND
2 1/4ND 4 1/64ND

Installation

Attaching the Lens

Attaching procedure
1
Detach the rubber lens mount stopper and turn the
lens mount lever counterclockwise to remove the lens
mount cap.
Rubber lens mount stopper
2
Align the center pin of the lens with the recess at the
top of the mount section and set the lens in place.
3
Turn the lens mount lever fully clockwise while
holding the lens to secure it.
4
Return the rubber lens mount stopper to its original
position.
K
BL AC
DO W N/
/W HI TE
R UP
EN TE
ME NU
H D
r H A D
R A
P o w e A M E
E O C
N V ID
IN IT IO
D E F
H IG H
Lens mount lever
EN TE R
ME NU
H D
P o w e
D E F IN
H IG H
21
Installation