Chapter 3 - Chassis Assembly Removal - Sony 2005 SXRD KDS-R50XBR1 Disassembly Manual

Chapter 3 - Chassis Assembly Removal

Screw
Disconnect
C-Brd
Connector
2 Screws 3 Screws
Small
Cover
Screws
Disconnect C-
Board cables
DMB
Becareful of
Cables
Removal of Complete Chassis Assembly
Vertical Bracket
Lift
Tabs
1
Remove 6 screws and
disconnect the C-Board ribbon
cable (Gentle press the Tan tab
on the side of the connector to
release cable.
Tan Tab
2
Remove the small cover (3 screw)
and disconnect C-Board cables.
CAUTION:
Be extremely careful not to damage
C-Board cables while removing the
Chassis Assembly.
3
Lift the two locking tabs and slide
chassis straight out until it is
stopped by the vertical bracket
(right side) .
CAUTION:
Be extremely careful not to damage
C-Board cables when sliding the
chassis out. Gentle push cables
under the DMB assembly.
5
Bracket stops
chassis