Chapter 6 - Q-Box & Pd-Board Removal - Sony 2005 SXRD KDS-R50XBR1 Disassembly Manual

Chapter 6 - Q-Box & PD-Board Removal
Wire Holders
USB Cable
Small
Cover
Access & Removal of Q -Box & PD-Board
(Digital Module Block DMB )
Slide Out
Wire Holders
Screws
indicated by
red circles
DMB Outer
Shield
1
2
Connector
Cover
I-Link
Jack
Screws
(on side )
13
The Chassis only needs to be
slightly slid out to access the
screws and wire holders to
access the Q-Box and PD-
board.
Reference the "Complete PCB
Chassis" section for details to
free and slide out the chassis .
Remove all wires from wire
holders.
Disconnect USB cable
Remove 16 screws, Small
Cover, and the Connector
Cover to remove DMB outer
shield.
When all screws are removed,
pull the left-side of the shield
out first to clear the i -link
connectors on the right -side of
the shield.
Once i-link connectors are clear
pull shield straight off.