Remote Switching; Receiving Faxes Remotely - Kyocera Fax Operation Manual

Remote Switching

Changing the Remote Switching Number

Receiving Faxes Remotely

OPERATION GUIDE
Remote switching lets you receive faxes by forwarding the fax signal from
a telephone connected to the FAX System. This function is convenient if
you are using a regular phone at another location, allowing you to use that
phone to receive faxes as well.
NOTE:
Remote switching requires a telephone provided by the user that
supports tone dialing. This phone must be connected to the FAX System.
Change the remote switching number (the default value is 55).
1
Press System Menu/Counter.
2
Press or to select FAX Setting. Press Enter.
3
Press or to select FAX RX Setting. Press Enter.
4
Press or to select Remote SW Dial. Press Enter.
5
Use the numeric keys to enter the
new remote switching number (2
digits). Press Enter to register the
number.
6
Press right Select to return to the basic screen.
Perform the following procedure to initiate fax reception from a connected
telephone.
1
The telephone will ring for
incoming calls.
Advanced Functions
Remote SW Dial :
(00 ~ 99)
55
Cancel
5-5