Free Motion Darning, Stippling - Singer Smart II Instruction Manual

1 2
3
4
a
b
c
5
GB

Free motion darning, stippling

* The darning foot is an optional accessory not included with
your machine. (1)
Set the machine as illustrated.
Install the darning plate. (2)
Remove the presser foot clamp. (3)
Attach the darning foot to the presser foot holder. The lever (a)
should be behind the needle clamp screw (b). Press the darning
foot on firmly from behind with your index finger and tighten the
screw (c). (4)
For darning, first sew around the edge of the hole (to secure the
threads). (5)
First row: Always work from left to right. Turn work by 1/4 and
oversew. A darning hoop is recommended for easier sewing
and better results.
Note:
Free motion darning is accomplished without the sewing
machine internal feed system. Movement of the fabric is
controlled by the operator. It is necessary to coordinate
sewing speed and movement of fabric.
Sew a straight or zigzag stitch following your design line. Using
the optional darning foot will help guide you as you sew.
54