Wireless Measurement; Figure 6-2. Laser Dot Centered On Prism Dust Cap - Fluke 830 User Manual

Wireless measurement

The measurement mode that will be described here is 'Compass' mode. In
this mode, measurement points are taken at any 3 of the 8 available sectors.
'Compass' mode and 'Clock' modes are the default measurement modes for
horizontal and vertical machines respectively.
Switch the wireless module on using its little silver toggle switch. This will power
the sensor and initialize the laser beam. Center the laser dot on the prism dust
cap (see Figure 6-2).

Figure 6-2. Laser dot centered on prism dust cap

Do not stare into beam.
Note
Warning
Getting started
Wireless measurement
41