[Start Screen] Selecting The Startup Screen - Kyocera Finecam L4 Instruction Manual

[START SCREEN] Selecting the Startup Screen

There are three types of startup screen.
KYOCERA logo screen
Customized screen
[OFF]
Operation
1
Turn on the power and set the mode select dial to
"SET UP".
2
Press Up or Down on the directional keypad to
select [START SCREEN], then press Right on the
directional keypad.
3
Press Left or Right on the directional keypad to
select one of the screens, then press the e button
to complete the setting.
Operation — Setting an image as startup screen
1
Select the center image in step 3 of [Operation], then press Down on the
directional keypad.
2
Press Left or Right on the directional keypad to
select the image, then press the e button.
3
Select [SET] and press the e button.
4
Select the center image, then press the e button to
complete the setting.
● As the image set for the startup screen is saved in the camera's memory, the startup screen
will not change even if you replace the memory card or delete the image.
Using Setup "SET UP" Mode Functions
(default)
You can select an image recorded in the memory card as a
startup screen.
Nothing appears on start screen.
SET UP(2/3)
MODE LOCK OFF
BEEP ON
CUSTOM SET LCD BRIGHT
COLOR SELECT YELLOW
START SCREEN SET
SELECT START SCREEN
OK
SELECT IMAGE
RESET
OK
EXECUTE SETTINGS?
SET
CANCEL
SELECT START SCREEN
SELECT IMAGE
OK
89