Preparation of Camera
2
Turning the Power ON
■ Battery indicator and replacing time
Fully
charged
3
Setting the Date and Time
If the camera has been left for a long time without a battery pack, the date and time will be
reset. When you replace the battery pack with a new one, make sure that the date and time
are correct.
1
2 Set the date and time.
DATE/TIME ADJUSTMENT
16
Half
consumed
SET UP(1/3)
DISP.
DISP.
MENU
Y.M.D
OK
CANCEL
Press the POWER button.
● The picture you take with this camera can be set
as the startup screen. (page 89)
Remaining
power is low.
Replace the
battery pack
soon.
Set the mode select dial to
"SET UP".
The setup menu is displayed.
1 Press Down on the directional keypad to
select [DATE], then press Right on the
directional keypad.
2 Use the directional keypad to set the
date and time.
● Press Left or Right on the directional
keypad to move the cursor to Year
Month
Display format*.
● Press Up or Down on the directional
keypad to change each value and the
display format.
For Display format of date, see
page 17.
The camera cannot
be operated.
Replace the battery
pack.
Day
Hour
Minute