[BRIGHT CNTRL] Adjusting the LCD Monitor Brightness | [FORMAT] Initializing Memory Cards | [POWER SAVE] Having the Camera Turn Off Automatically to Save Power | [MODE LOCK] Preserving Your
Function Settings | [BEEP] Adjusting the Volume of the Camera Button Beep | [SHUTTER VOL] Adjusting the Volume of the Shutter Sound | [SELECT LCD] Selecting the Display Used at Startup |
SCREEN] Selecting the Startup Screen
| [ZLANGUAGE] Selecting the Menu Language | [VIDEO OUT] Setting the Output Format for a TV Connection | [FILE NO.] Starting Image File Numbers from 0001 |
[MODE RESET] Resetting Function Settings
[START SCREEN] Selecting the Startup Screen
Use this procedure to select one of the following as the startup screen
displayed when you switch the camera on:
• Finecam logo
• User-defined screen : Allows you to set an image stored on a memory card.
• OFF screen
To set the Finecam logo screen
1
Set the mode select dial to "G" and
turn the camera on.
2
Press the up u or down d button to
select [START SCREEN] and then press
the right button r.
3
Press the left button l to select the
Finecam logo screen.
4
Press the OK button E.
The Finecam logo screen is set and the Set Up menu screen reappears.
BNote
This setting is retained when you turn the camera off.