KTM 125 EXC Owner's Manual page 108

17 TUNING THE ENGINE
Main work
–
Remove screws
B02129-10
–
Take cap
the clutch cover.
–
Pull both springs off of the spring insert.
B00056-11
–
Mount the required auxiliary spring
into the clutch cover together.
Auxiliary spring with yellow marking (54637072300)
Auxiliary spring with green marking (54837072100)
Auxiliary spring with red marking (54837072000)
The recess in spring insert
Info
B02130-10
Screw
tic.
–
Check the O-ring in the cap.
–
Position the cap.
–
Mount and tighten the screws.
Guideline
Screw, exhaust control cover

.
 
, adjusting spring , auxiliary spring


engages in the angle lever.

must not be turned as this would worsen the engine characteris-

, and spring insert

and adjusting spring and slide them
M5 6 Nm (4.4 lbf ft)
106

out of