Specifications - Sony HT-DDW3000 Operating Instructions Manual

Specifications

Amplifier section
Models of area code SP, TH1
Power Output
Stereo mode (rated) (6 ohms, 1 kHz, THD 1%)
3)
Surround mode (reference) (6 ohms, 1 kHz,
THD 10%)
FRONT:
CENTER:
SURROUND:
3)
Surround mode (reference) (10 ohms,
100 Hz, THD 10%)
SUBWOOFER:
1)
Measured under the following conditions:
Area code
SP, TH1
2)
Measured under the following conditions:
Area code
TH1
3)
Reference power output for front, center, surround
speakers and subwoofer. Depending on the sound
field settings and the source, there may be no
sound output.
56
GB
1)
70 W + 70 W
2)
60 W + 60 W
RMS output
1)
100 W per channel
2)
90 W per channel
1)
100 W
2)
90 W
1)
100 W per channel
2)
90 W per channel
1)
60 W per channel
2)
50 W per channel
Power requirements
230 V AC, 50 Hz
Power requirements
220 V AC, 50 Hz
Inputs
Analog
Digital (Coaxial) Impedance: 75 ohms
Tone
Gain levels
Reproduction frequency range:
FM tuner section
Tuning range
Antenna
Antenna terminals
Intermediate frequency
AM tuner section
Tuning range
Models of area code SP, TH1
With 9-kHz tuning scale:
Antenna
Intermediate frequency
General
Power requirements
Area code
SP
TH1
Power consumption
Area code
SP, TH1
Power consumption (during standby mode)
Dimensions (width/height/depth) (Approx.)
Mass (Approx.)
Sensitivity: 800 mV/
50 kohms
±6 dB, 1 dB step
28 – 20,000 Hz
87.5 - 108.0 MHz
FM wire antenna
75 ohms, unbalanced
10.7 MHz
531 – 1,602 kHz
Loop antenna
450 kHz
Power requirements
230-240 V AC, 50/60 Hz
220-230 V AC, 50/60 Hz
Power consumption
220 W
0.3 W
430 × 145 × 306 mm
including projecting parts
and controls
7.6 kg