Advertisement
RD-HD5MD/HD7
DISASSEMBLY FOR REPAIR / ADJUSTMENT
DISASSEMBLY FOR REPAIR
How to open the tray if it does not come out.
1. Turn the gear in the direction of the arrow using a bamboo stick and so on in the drawing through the hole on the loading chassis
bottom.
Note : Do not use a screw driver like a metallic instead of a bamboo stick.
(There is a danger of damaging the gear.)
2. Pull out the tray frontward by hand when it comes just out.
ADJUSTMENT
ITEM
No.
AUDIO SECTION :
IDLE CURRENT
<1>
(RD-HD7 only)
4
INPUT
OUTPUT
SETTINGS
SETTINGS
SELECTOR : EXCEPT TUNER MODE
Connect a DC
voltmeter to
CP901 or CP902
CP901 (Lch)
CP902 (Rch)
RECEIVER
ALIGNMENT
SETTINGS
POINTS
Volume:
VR203 (Lch)
Minimum
VR204 (Rch)
ALIGN FOR
FIG.
8 mV
Hide quick links:
Advertisement
