Sony DCR-VX2000 Service Manual page 109

DCR-VX2000/VX2000E
For printed wiring boards
• Refer to page 4-117 for parts location.
• These boards are six-layer print board. However, the
patterns of layers two to five have not been included in
the diagrams.
• Chip parts
Diode
3
2 1
There are few cases that the part printed on this
diagram isn't mounted in this model.
VC-242
S/H AGC, TG, CAMERA SIGNAL PROCESS,
MS I/F, RS232C I/F, STILL CONTROL, MS DRIVE,
LA-026
DV SIGNAL PROCESS, REC/PB AMP,
200m/FOCUS DRIVE, VAP DRIVE,
LINE IN/OUT, LINE A/D, RGB DRIVE/TG,
KEY IN/CONNECTOR
CAMERA CONTROL, DRUM/CAPSTAN MOTOR DRIVE,
HI CONTROL, AU LINE A/D, D/A, LINE AMP
JK-190
(JACK BOARD)
DD-138
(DC/DC CONVERTER, DC REGULATOR)
SELECT DIAL CONTROL KEY
/
KP-010 MK-014
KP-010 (SELECT DIAL), MK-014 (CONTROL KEY) PRINTED WIRING BOARDS
— Ref. No. KP-010, MK-014 Boards; 10,000 Series —
MK-014
(CONTROL KEY)
KP-010
(SELECT DIAL)
MS-049
(MS CONNECTOR)
4-79 4-80