Ms Connector; Printed Wiring Board - Sony DCR-VX2000 Service Manual

MS-049 (MS CONNECTOR) PRINTED WIRING BOARD
— Ref. No. MS-049 Board; 20,000 Series —
For printed wiring board
• Refer to page 4-117 for parts location.
• This board is four-layer print board. However, the pat-
terns of layers two and three have not been included
in the diagram.
There are few cases that the part printed on this
diagram isn't mounted in this model.
VC-242
S/H AGC, TG, CAMERA SIGNAL PROCESS,
MS I/F, RS232C I/F, STILL CONTROL, MS DRIVE,
LA-026
DV SIGNAL PROCESS, REC/PB AMP,
200m/FOCUS DRIVE, VAP DRIVE,
LINE IN/OUT, LINE A/D, RGB DRIVE/TG,
KEY IN/CONNECTOR
CAMERA CONTROL, DRUM/CAPSTAN MOTOR DRIVE,
HI CONTROL, AU LINE A/D, D/A, LINE AMP
JK-190
(JACK BOARD)
MK-014
(CONTROL KEY)
KP-010
(SELECT DIAL)
MS-049

(MS CONNECTOR)

DD-138
(DC/DC CONVERTER, DC REGULATOR)
4-77
DCR-VX2000/VX2000E
MS CONNECTOR
4-78
MS-049