High Speed Recording And Automatic Finalizing; High Speed Recording; Normal Speed Recording And Listening - Philips CDR785/00 Service Manual

INTERNAL RECORDING
3 Press COMPILE CD to enter into the record mode.

High speed recording and automatic finalizing

High speed recording and automatic finalizing of the
current disc
CD TEXT EDITING
RECORD REC LEVEL BALANCE
TEXT
PROG TRACK EDIT
CD CD
CDR
JOG CONTROL
COMPILE CD
REC TYPE
NO
AUX
YES
ERASE FINALIZE
Notes:
– During High Speed recording, the Pause function is not
• If the total time of the program is of bigger size than the
operative.
remaining recording time of the CDR(W):
– Copy prohibited tracks will be copied analog. ANALOG REC
is displayed.
– During High Speed recording, the sound is not audible.
If you still start recording, only the whole tracks of the program
– When the CDR(W) already contains a recording the ALC
that fit onto the CDR(W) will be recorded.
function will become active. then lights up on the display.
ALC
4 Press either:
– If required the recording level can be set first, using the REC
NO to change the program.
LEVEL key. See "Rec Level key" under "Recording General".
1 Make sure that the CDR(W) is absolutely free of scratches and
dust particles.
or
2 Press CD™CD to enter into the record mode.
YES to confirm recording.
Both decks will be selected in the display, the arrow and the
YES key start blinking. The remaining recording time of the
CDR(W), the total playing time of the source CD and
5 Press either:
RECORD CD1 ( or 2, 3) ? are displayed.
YES, if the CDR(W) shall be finalized after recording,
or
STEP TEXT TOTAL TRACK TIME TOTAL REM REC TRACK TIME
NO, if the CDR(W) shall not be finalized after recording.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 +
COMPILE CD TRACK PROG
DIGITAL
CD RW CD RW
OPTICAL
SHUFFLE REPEAT ALL EDIT
ANALOG
RECORD IN PROGRESS FINALIZE ALC
3 Press YES to start recording and finalizing.
• To check the elapsed recording time, press DISPLAY. This can be
The arrow lights, and are
RECORDING IN PROGRESS FINALIZE
done during recording.
shown, high speed recording and finalizing start and the
actual recording time left starts to count down.
• Recording will stop automatically.
6 To stop recording manually, press STOP 9.
• To check the elapsed recording time, press DISPLAY. This can be
done during recording.
• If STOP 9 was pressed within 3 seconds after YES, no
• Recording will stop automatically.
recording will take place.
4 To stop recording manually, press STOP 9.
Note: If no program is available and you press COMPILE CD, you
• If STOP 9 was pressed within 3 seconds after YES, no
recording will take place.
Note: If a program was already available before pressing
CD ™ CD, this will be ignored.
goes off and the
PROG
Important:
current disc will be recorded. After finishing the recording,
If you want to play the recorded CDR disc on any regular
is shown and the program is available again.
PROG
CD player, it must first be finalised. See 'Finalising discs'.
High speed recording and automatic finalizing (optional) of
Finalised CDRW discs play only on CDRW compatible CD
the current program
players.
1 Make sure that the CDR(W) is absolutely free of scratches and
dust particles.
2 Select and store all desired tracks in the CD changer memory
(see "Programming track numbers").
22
Both decks will be selected in the display, the arrow starts
blinking. The remaining recording time of the CDR(W),
the total playing time of the program and
RECORD PROG ? are displayed.
STEP TEXT TOTAL TRACK TIME TOTAL REM REC TRACK TIME
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 +
COMPILE CD TRACK PROG
DIGITAL
CD RW CD RW
OPTICAL
SHUFFLE REPEAT ALL EDIT
ANALOG
RECORD IN PROGRESS FINALIZE ALC
NOT FITTING ! will be displayed briefly, followed by the
remaining recording time and RECORD PROG ?
starts blinking. Now you can change the program (see
PROG
"Program") and return to the record mode by pressing
COMPILE CD.
AUTO FIN ? is displayed.
The recording process starts. The arrow lights,
RECORDING IN
is shown, high speed recording and (if
PROGRESS FINALIZE
selected) start and the actual recording time left starts to
count down.
enter immediately into the program menu. Start your
programming and return to the record mode by pressing
PROGRAM or COMPILE CD.
• To stop recording manually, press STOP 9.

High speed recording

• If STOP was pressed within 3 seconds after YES, no
High speed recording of an entire disc, a track, a
recording will take place.
program or a track edit
Important:
RECORD
REC LEVEL BALANCE
TEXT PROG TRACK EDIT
CD CD
CDR
JOG CONTROL
If you want to play the recorded CDR disc on any
COMPILE CD
regular CD player, it must first be finalised. See
REC TYPE NO
AUX YES
'Finalising discs'.
ERASE
FINALIZE
Finalised CDRW discs play only on CDRW compatible
CD players.
1 Make sure that the CDR(W) is absolutely free of scratches
and dust particles.
2 Press either CD 1, CD 2 or CD 3 to select the disc you wish

Normal speed recording and listening

to record from.
Normal recording and listening of an entire disc, a
3 Press REC TYPE on the set to enter into the recording menu.
track, a program or a track edit
4 Rotate ¡ JOG CONTROL ™ to select one of the following
high speed record modes:
If a disc from the CD changer is selected:
CD FAST ?: for high speed recording of an entire disc.
• Continue with step 5.
TRACK FAST ?: for high speed recording of a track.
1 Make sure that the CDR(W) is absolutely free of scratches
• Press YES to confirm.
and dust particles.
• Rotate ¡ JOG CONTROL ™ to select the track.
REC TR ? and the tracknumber are displayed.
2 Follow step 2 and 3 of "High speed recording".
• Continue with step 6.
3 Rotate ¡ JOG CONTROL ™ to select one of the following
normal record options:
If CD changer program mode is available:
PROG FAST ?: for high speed recording of the
If CD changer is selected:
selected disc or of the program.
If CD changer track edit mode is available:
A-B FAST ?: for high speed recording of the A–B
track.
5 Press YES to confirm your selection.
Both decks will be selected in the display, the arrow
starts blinking. The remaining recording time of the
CDR(W), the total recording time of the CDR(W) and
either RECORD CD1 (or 2, 3)?, RECORD PROG ?
If CD changer program mode is available:
or RECORD A-B ? is displayed.
STEP TEXT TOTAL TRACK TIME TOTAL REM REC TRACK TIME
If CD changer track edit mode is available:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 +
COMPILE CD TRACK PROG DIGITAL
CD RW CD RW
OPTICAL
SHUFFLE REPEAT ALL EDIT
ANALOG
FINALIZE ALC
RECORD IN PROGRESS
4 Follow step 5 and 6 of "High speed recording".
6 Press YES to start high speed recording.
The arrow lights, is shown, high
RECORDING IN PROGRESS
Note: If required the recording level can be set first, using the
speed recording starts and the actual recording time left
starts to count down.
• To check the elapsed recording time, press DISPLAY. This
can be done during recording.
• Recording will stop automatically.
INTERNAL RECORDING
CD TEXT EDITING
RECORD REC LEVEL BALANCE
TEXT
PROG TRACK EDIT
CD CD
CDR
JOG CONTROL
COMPILE CD
REC TYPE
NO
AUX YES
ERASE FINALIZE
CD LISTEN ?: for listening to the entire disc during
normal recording
• Follow step 5 and 6 of "High speed recording".
TRACK LISTEN ?: for listening to the track during
normal recording
• Press YES to confirm.
• Rotate ¡ JOG CONTROL ™ to select the desired track.
REC TR ? and the tracknumber is displayed.
• Continue with step 6 of "High speed recording".
PROG LISTEN ?: for listening to the program during
normal recording
A-B LISTEN ?: for listening to the A–B track during
normal recording
REC LEVEL key. See "Rec Level key" under "Recording
General".
23