Installation; Connections General; Analog Connections; Digital Coaxial Connections - Philips CDR785/00 Service Manual

INSTALLATION

Connections general

Analog connections

This connection must be made for playback on the CD recor-
For playback on the CD recorder from the CD changer deck the
following outputs are present: der deck as well as the CD changer deck (cable 2 ).
– Digital coaxial output (CD & CD-R) Cable 1 is only required if you want to make recordings from
– Analog output (CD & CD-R) an external analog source.
We advise you to connect these to the TAPE or CD-R input on
your amplifier.
For external recording the following inputs are present:
– Digital optical input
– Digital coaxial input
– Analog input (stereo)
The connections you make will depend upon the possibilities
your audio equipment offers. Please refer to the user manuals
for your other audio equipment first.
Digital recordings (optical or coaxial) give the best
performance in audio and usability (e.g. auto-track).
(The digital optical connection is less sensitive to external
disturbances).
If your equipment does not offer digital connections, the high
quality Analog-Digital-Convertor of your set will ensure very
good audio performance when recordings are made from the
analog input.
Playback via the digital coaxial output of the CD recorder
Use the audio cables supplied. Connect the red plugs to the
gives the best audio performance.
R sockets, and the white plugs to the L sockets.
If your equipment does not offer digital connections, the high
quality Digital-Analog-Convertor of the set ensures a very
1 For external recording, connect cable 1 between the ANA-
good sound quality via the analog output.
LOG IN-sockets on the set and the CDR LINE- or TAPE OUT-
sockets of an amplifier.
We advise you to always establish both digital and analog
connections. In this way you can always make analog recor- Note: For recording directly from a CD player or tape deck, the
dings when digital recording is not possible.
We have described the most common ways of connecting the
2 For playback, connect cable 2 between the ANALOG OUT-
CD recorder. If you still have difficulties with the connections
sockets on the set and the input sockets of an amplifier e.g.
you can always contact the Philips Consumer Service desk in
TAPE IN, CD-R or AUX.
your country.
Note: Never use the PHONO input.
12
RECEIVER/AMPLIFIER
IN OUT
TAPE /CDR
2
1
L
L
L
R
R OPT ICAL
R
IN
OUT IN IN
OUT
ANAL OG DIGIT AL
CD RECORDER
analog input of the set should be connected to the ana-
log output of the CD player or tape deck.

Digital coaxial connections

Digital optical connections

This connection is required if you want to make recordings This connection is required if you want to make recordings
from an external CD player with a digital coaxial output. from an external CD player with a digital optical output.
RECEIVER/AMPLIFIER
1
IN OUT
TAPE /CDR
2
L
OPT ICAL
R
IN OUT IN
IN OUT
ANAL OG
DIGIT AL
3
CD RECORDER
OPT ICAL
IN
OUT
OUT
DIGIT AL
CD PLAYER
1 For external recording, connect the cable 3 between the
DIGITAL IN-socket on the set and the DIGITAL OUT-socket
of an external CD player.
Note: Your set is equipped with a digital coaxial output (com-
mon output for CD recorder & CD changer deck). This
output can be used for digital playback. (e.g. Philips
receiver FR960 or FR970.)
1 Remove the dust caps from the digital optical connection.
(We recommend you save the cap.)
2 For external recording, connect a fibre-optic cable 4 bet-
ween the digital optical input of the set and the digital-
optical output of an external CD player.
Note: For playback, the digital coaxial outputs or analog out-
INSTALLATION
RECEIVER/AMPLIFIER
1
IN
OUT
TAPE /CDR
2
L
R OPT ICAL
IN OUT IN IN
OUT
ANAL OG DIGIT AL
4
CD RECORDER
OPT ICAL
OUT
IN OUT
DIGIT AL
CD PLAYER
When connecting the Digital
Optical cable, make sure it
is fully inserted until
there is a click.
puts of the CD Changer and CD recorder should be
connected to an amplifier.
13