Running An App; Stopping An App - Cisco Video Surveillance 3000 Series Configuration Manual

Table of Contents

Advertisement

Chapter 6
Application Manager
From the IP camera user interface, click the Setup link, click Feature Setup to expend the menu, then
Step 1
choose Event.
In the Event Notification window, take these actions:
Step 2
a.
b.
c.
d.
From the Setup menu in the web-based interface of the camera, click Log to expend the menu, then
Step 3
choose Setup.
In the Log Setup window, take these actions:
Step 4
a.
b.
c.

Running an App

To run an app on an IP camera, follow these steps:
Procedure
From the IP camera user interface, click the Setup link, click Application Manager to expend the menu,
Step 1
then click App Setup.
Click the radio button for the app that you want to run.
Step 2
Click the Run button.
Step 3

Stopping an App

To stop an app that is running on an IP camera, follow these steps:
Procedure
From the IP camera user interface, click the Setup link, click Application Manager to expend the menu,
Step 1
then click App Setup.
Click the radio button for the app that you want to stop.
Step 2
Click the Stop button.
Step 3
OL-32285-01
Check the App check box in the Event Triggering area.
Check one of more of the Actions check boxes for the App option in the Event Triggering area to
designate the action that the IP camera takes when it receives an event trigger.
Click Set All in the Event Scheduling area.
Click Save at the bottom of the window.
Check the Enable Syslog check box in the Syslog Settings area.
Enter the IP address of the server on which to log events.
Click Save at the bottom of the window.
Cisco Video Surveillance 3000 Series IP Camera Configuration Guide
Installing an App on an IP Camera
6-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

3000 series

Table of Contents