Table of Contents
Advertisement
When installing InstaTrike, bolt leanstop brace to receiver hitch by
inserting bolt from bottom through the leanstop brace and
washers/spacers. Thread bolt into bracket on hitch and tighten.
When removing InstaTrike reverse the above procedure.
Adding or removing washers/spacers between receiver hitch and
leanstop brace will allow you to level your motorcycle if necessary
and adjust traction/handling.
Leanstop brace is slotted to allow for proper alignment with bolt holes
NOTICE:
Be certain that hitch bolts are inserted from the
Leanstop Braces
BOTTOM
Hide quick links:
Advertisement
Table of Contents
