Yamaha Virago 750 Installation Manual page 5

NOTICE: Install all bolts and brackets loosely until all
bolts and brackets are in place
Remove any aftermarket accessories (saddle bags,
back rests, etc) before hitch installation. After
installation remount accessories. NOTE: Some
aftermarket accessories may not be compatible
with InstaTrike hitch.
1) Place motorcycle on a smooth level surface on center stand.
2) Attach Bracket A (left) to outside of rear passenger foot peg mount.
Place spacers between Bracket A and foot peg mount. Use new bolts
provided.
3) Attach Bracket B (right) to outside of rear passenger foot peg.
Place spacers between Bracket B and foot peg mount. Use new bolts
provided. Bracket will extend over top of mufflers.
4) Attach Brackets C (left) and D (right) to rear frame bolts on