"Device Not Found" Message - Linksys AC2400 User Manual

Linksys E-Series
To fix the problem on Mac computers:
1. In the menu bar across the top of the screen, click the AirPort icon. A
list of wireless networks appears. Linksys Connect has automatically
assigned your network a name.
In the example below, the computer was connected to another wireless
network named JimsRouter. The name of the Linksys E-Series network,
BronzeEagle in this example, is shown selected.
2. Click the wireless network name of your Linksys E-Series router
)BronzeEagle in the example(.
3. Type your wireless network password )Security Key( into the Password
field, then click OK.

"Device not found" message

If you get a "Device not found" message when trying to connect a network device
)such as an iPhone, iPod, or smartphone(, follow these troubleshooting steps.
TIP
For a stronger signal during initial setup, move your wireless
devices near your router. Long distances make it harder for the
router to detect the devices.
To fix the problem:
1. Run Linksys Connect.
Troubleshooting
12