USB 3.0 port—Connect and share a USB drive on your network or on the Internet. )Go to support.linksys.com/storagelink for more details.( • USB 2.0/eSATA combo port—Connect and share a USB or eSATA drive on your network or on the Internet. )Go to support.linksys.com/storagelink for more details.(...
How to set up your router Use Linksys Connect to manage your router The easiest and fastest way to set up your router is to run the Linksys Connect After your router has been set up and Linksys Connect has been installed, you setup software can use Linksys Connect to easily manage many of your router’s settings such as:...
“admin” 1. Run Linksys Connect, click Change under Router settings, click Advanced If you used Linksys Connect to set up your router, you can see your settings, then click OK. router’s user name and password by running Linksys Connect, then –...
Linksys E-Series Advanced Configuration Setup > Basic Setup Language Select your language—To use a different language, select one from the The first screen that appears is the Basic Setup screen. This allows you to change drop-down menu. The language of the browser-based utility will change five the router’s general settings.
Linksys E-Series Advanced Configuration Wireless > Basic Wireless Settings PPTP Point-to-Point Tunneling Protocol )PPTP( is a service that generally applies to The basic settings for wireless networking are set on this screen. connections in Europe. If your PPTP connection supports DHCP or a dynamic IP address, then select Obtain an IP Address Automatically.
Page 8
If you changed the SSID in the Linksys Connect setup software, both bands have the new SSID. You may give them different names through the browser-based utility.
Passphrase—Enter a passphrase of 8-63 characters. If you used the setup software for installation, the default is changed to a unique passphrase, which you can find by running Linksys Connect, then clicking Router settings. WEP is a basic encryption method, which is not as secure as WPA2/WPA. WEP is...
Internet. Your router’s CD includes Linksys Connect, the router setup software that makes it easy to connect network devices, change router settings, control When you run the setup CD, Linksys Connect is automatically installed onto guest access, enable parental controls, and connect to the Internet. Linksys your computer.
To install Service Pack 3: 1. Click the link in the Linksys Connect error message or connect to the Microsoft Update website )update.microsoft.com/windowsupdate(. 2. Follow the instructions on the website or contact Microsoft if you need further help.
5. Return to the Linksys Connect window and click Next to try again. If the modem. This port on the modem is usually labeled Ethernet, but may be named Internet or WAN.
3. Click your own network name, then click Connect. In the example below, the computer was connected to another wireless network named JimsRouter. The name of the Linksys E-Series network, BronzeEagle in If you cannot access your router because your computer is not connected to this example, is shown selected.
BronzeEagle in this example, is shown selected. For a stronger signal during initial setup, move your wireless 2. Click the wireless network name of your Linksys E-Series router devices near your router. Long distances make it harder for the )BronzeEagle in the example(.
Page 15
5. On the wireless network device, select the network name of your router and enter the password )Security Key(. 8. When your wireless device is successfully connected to your wireless 6. In Linksys Connect, click Next. network, enter a name for the device in Linksys Connect, then click Finish.
Linksys E8350 Notes For regulatory, warranty, and safety information, see the CD that Model Name Linksys E8350 came with your router or go to Linksys.com/support. Description AC2400 Dual Band Gigabit Wi-Fi Router Specifications are subject to change without notice. Model Number...