Af Custom Functions - Canon EOS 5DS Instruction Manual

Specifications
• Autofocus
Type:
AF points:
Focusing brightness
range:
Focus operation:
AF area selection mode: Single-point Spot AF (manual selection), Single-point AF
AF point automatic
selection conditions:
AF Configuration Tool:
AI Servo AF
characteristics:

AF Custom Functions:

AF fine adjustment:
AF-assist beam:
• Exposure Control
Metering mode:
Brightness metering
range:
490
TTL secondary image-registration, phase-difference
detection with the dedicated AF sensor
61 (Cross-type AF point: Max. 41 points)
* Number of available AF points, cross-type points, and
Dual cross-type points vary depending on the lens.
* Dual cross-type focusing at f/2.8 with 5 AF points
vertically aligned at the center.
(AF group: When Group A lenses are used)
EV -2 - 18 (Conditions: f/2.8-sensitive center AF point,
One-Shot AF, room temperature, ISO 100)
One-Shot AF, AI Servo AF, AI Focus AF, Manual
focusing (MF)
(manual selection), AF point expansion (manual
selection: up, down, left, and right), AF point expansion
(manual selection: surround), Zone AF (manual
selection of zone), 61-point automatic selection AF
Based on EOS iTR AF setting
(Enables AF incorporating human face/color information)
* iTR: Intelligent Tracking and Recognition
Case 1 - 6
Tracking sensitivity, Acceleration/deceleration tracking,
AF point auto switching
16 functions
AF Microadjustment (All lenses by the same amount,
Adjust by lens)
Emitted by the EOS-dedicated external Speedlite
Approx. 150,000-pixel RGB+IR metering sensor and
252-zone TTL metering at max. aperture
EOS iSA (Intelligent Subject Analysis) system
• Evaluative metering (linked to all AF points)
• Partial metering (approx. 6.1% of viewfinder at center)
• Spot metering (approx. 1.3% of viewfinder at center)
• Center-weighted average metering
EV 0 - 20 (at room temperature, ISO 100)