Removing The Speakers; Replacing The Switch Unit - Sony KDL-40W590B Service Manual

36. Clear the Self Check screen.
a. Press to exit Service Mode.
POWER
b. Press the following buttons on the Remote Commander within
1 second of each other:
Channel
DISPLAY
SELF CHECK
000 RESERVED --------------------- --------------------- --------------------- 00
000 RESERVED --------------------- --------------------- --------------------- 00
002 MAIN_POWE --------------------- --------------------- --------------------- 00
003 DC_ALERT --------------------- --------------------- --------------------- 00
003 AUD_PROT --------------------- --------------------- --------------------- 00
003 HDMI_EQ --------------------- --------------------- --------------------- 00
003 TU_DEMOD --------------------- --------------------- --------------------- 00
004 VLED --------------------- --------------------- --------------------- 00
004 LD_ERR --------------------- --------------------- --------------------- 00
005 HFR_ERR --------------------- --------------------- --------------------- 00
005 TCON_ERR 120123132522 120123113645 --------------------- 02
005 P_ID-ERR --------------------- --------------------- --------------------- 00
006 BACKLITE --------------------- --------------------- -------------------- 00
007 TEMP_ERR --------------------- --------------------- --------------------- 00
007 FAN_ERR --------------------- --------------------- --------------------- 00
010 EMITTER --------------------- --------------------- --------------------- 00
101 VPC_WDT --------------------- --------------------- --------------------- 00
102 MEPS_WDT --------------------- --------------------- --------------------- 00
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT --------------------- --------------------- --------------------- 00
00345 000333 06789
c. To clear the error history and error count press
d. Press Power
I/0
37. Cycle AC Power (Unplug and plug AC Cord from the outlet).
KDL-40W590B/40W600B/48W590B/48W600B
-
5
Volume Power
Error Count
8
to exit Self Check Mode.
SECTION 3 - REPAIR INFORMATION

REMOVING THE SPEAKERS

1. Disconnect connectors from each Speaker, then lift to detach.
I/0

REPLACING THE SWITCH UNIT

1. Disconnect connector from Switch Unit, then lift to detach.
2. Install the new Switch Unit and connector.
.
0
16