REMOVING THE SPEAKERS
1. Press down the connector clip to disconnect.
NOTE:
For the Speaker Box Right you must also disconnect the Switch
Unit connector.
2. Remove screws and lift the Speaker Box to detach.
REPLACING THE SWITCH UNIT
1. Remove screws and press as shown to remove the Switch Unit.
2. Install the new Switch Unit, screws and connectors.
KDL-32W600A/32W650A/42W650A/42W651A
SECTION 3 - REPAIR INFORMATION
REMOVING THE SMART CORE BLOCK
1. Remove 1 screw, then release the Harness attached to LCD Panel.
2. Grasp Smart Core Block as shown, then twist it downwards to release
clips.
3. Apply pressure on both sides of Cover, SC and pull it apart to detach.
4. Disconnect connectors and release cable from LID, SC hook.
5. Unclamp 2 side clips from the Lid, SC and lift as shown to detach.
LID, SC
12